DALY BMS 4S 12V 60A with Balancer for LiFePO4 Battery
The DALY BMS 4S 12V 60A is an authentic hardware protection board specifically calibrated for 4-series (4S) 12.8V Lithium Iron Phosphate (LiFePO4) battery packs. Ideal for 500W–750W solar IPS systems, trolling boat motors, portable emergency power packs, and DC lighting installations, this BMS delivers superior cell balance, short-circuit protection, and thermal stabilization.
Key Features
- Continuous 60A Load Capacity: Supports high-efficiency DC power delivery up to 750W continuous load without thermal breakdown.
- Built-in Cell Equalization: Integrated passive balancing circuit stabilizes voltage spread among all 4 cells during full charging.
- All-Weather Protection: Potted with water-resistant thermally conductive resin inside a solid red anodized aluminum casing.
- Integrated NTC Temperature Probe: Continuous thermal tracking automatically cuts off circuit in extreme hot or cold conditions.
- Multi-Protection Layer: Fast-acting hardware cutoff for over-charge, over-discharge, over-current, and load short-circuit events.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model / Brand | DALY 4S 12V 60A Hardware LiFePO4 BMS |
| Battery Chemistry | Lithium Iron Phosphate (LiFePO4) |
| Configuration | 4S (4 Cells in Series) |
| Nominal Voltage | 12.8V |
| Overcharge Cutoff | 3.65V ± 0.05V per cell |
| Over-discharge Cutoff | 2.50V ± 0.05V per cell |
| Continuous Discharge Current | 60A |
| Continuous Charge Current | 30A |
| Peak Surge Current | 150A – 180A |
| Balance Current | 30mA – 35mA Passive Balance |
| Thermal Sensor | External NTC Temperature Probe Included |
Applications in Bangladesh
Widely deployed in 12V 50Ah – 100Ah LiFePO4 battery builds for domestic solar home systems, mini IPS/UPS backup systems, router/camera backup power supplies, and agricultural field equipment.




Reviews
There are no reviews yet.