An electric bicycle Pedal Assist System (PAS) uses a sensor to detect when the rider is pedalling and signals the controller to provide motor assistance. It can make riding feel more natural and can help manage battery consumption, but the result depends on the sensor, controller settings, motor and riding conditions.
What Is an E-Bike PAS Sensor?
A PAS sensor detects pedal movement or crank rotation. When the rider pedals, the sensor sends pulses or a signal to the e-bike controller. The controller then decides whether and how much power to deliver, according to its programming and the selected assist level.
PAS is different from a throttle: a throttle requests motor power directly, while PAS assistance is triggered by pedalling. Some e-bikes provide both systems.
Common Types of PAS Sensors
1. Cadence PAS sensor
A cadence sensor usually uses a magnet disc fitted near the crank and a pickup sensor mounted on the frame. As the crank rotates, the magnets pass the pickup and create pulses. The controller interprets those pulses as pedalling.
- Usually straightforward to install on compatible crank layouts.
- Assistance is generally based on pedal rotation rather than the force applied to the pedals.
- There may be a short delay before assistance starts or stops, depending on the controller.
2. Torque sensor
A torque sensor measures how much force the rider applies to the pedals. A compatible controller uses that measurement to adjust motor assistance. This can produce a more proportional, natural riding feel, but torque-sensing systems require compatible components and controller support.
3. Integrated or proprietary sensors
Some mid-drive motors and e-bike systems use sensors integrated into the motor or crank assembly. These may use proprietary connectors, communication protocols or firmware. They are not necessarily interchangeable with a generic cadence sensor.
How Does PAS Work With the Controller?
- The rider turns the pedals.
- The cadence or torque sensor detects movement or pedal force.
- The sensor sends a signal to the controller.
- The controller checks the assist setting and its configured limits.
- The controller supplies power to the motor when the system conditions are satisfied.
The sensor does not independently determine the safe current for the motor. The controller, battery, BMS, wiring and motor must all be suitable for the system voltage and current.
How to Choose a Compatible PAS Sensor
- Sensor type: Confirm whether the controller expects cadence pulses, a torque signal or a proprietary sensor.
- Connector: Check the connector shape, pin count and pinout. Similar-looking plugs do not guarantee matching wiring.
- Voltage and signal: Confirm the sensor supply voltage and signal type from the controller documentation. Do not guess based on wire colours.
- Mounting: Check crank axle, bottom-bracket space, magnet-disc direction and sensor clearance.
- Assist settings: Confirm that the controller supports PAS levels and the selected sensor mode.
- System compatibility: Match the controller to the motor and battery voltage/current limits, and ensure the battery BMS can support the expected load.
Cadence Sensor vs Torque Sensor
| Feature | Cadence sensor | Torque sensor |
|---|---|---|
| What it detects | Pedal/crank rotation | Pedal force or torque |
| Assistance feel | Often more on/off or speed-step based | Can feel more proportional to rider effort |
| System complexity | Generally simpler | Usually more complex |
| Compatibility | Must match controller input and mounting | Requires compatible sensor and controller |
Basic PAS Installation Checklist
- Switch off the e-bike and disconnect the battery before working on wiring.
- Identify the controller’s documented PAS connector and sensor requirements.
- Install the magnet disc and pickup in the orientation and clearance specified by the manufacturer.
- Secure the cable away from the chain, crank, wheel, brakes and other moving parts.
- Reconnect only after checking the connector pinout and insulation.
- Raise the driven wheel securely for an initial low-power function test, keeping hands and clothing away from moving parts.
- Test brake cut-off operation and confirm assistance stops as expected before a cautious road test.
If the connector pinout or controller configuration is unknown, ask a qualified e-bike technician rather than connecting wires by trial and error.
Common PAS Problems and Checks
- No assistance: Check battery connection, controller status, sensor alignment, magnet-disc direction and the correct PAS input.
- Intermittent assistance: Inspect loose connectors, damaged cables, excessive sensor gap and magnets that are missing or incorrectly positioned.
- Assistance does not stop promptly: Stop riding and check sensor signals, controller settings and brake cut-off function. Do not use the bicycle until the fault is resolved.
- Wrong or incompatible sensor: Verify the controller manual, sensor voltage and signal specification; connector shape alone is not enough.
Frequently Asked Questions
Can I use any PAS sensor with any e-bike controller?
No. The sensor type, supply voltage, signal format, connector pinout and controller firmware must be compatible.
Does a cadence PAS sensor measure how hard I pedal?
Usually not. A basic cadence sensor detects rotation. A torque sensor is designed to measure pedal force.
Will PAS increase battery range?
It may help some riders use assistance more efficiently, but it does not guarantee a particular range. Speed, terrain, rider and cargo weight, tyre pressure, temperature, battery condition, motor efficiency and assist level all affect energy use.
Can PAS and throttle work together?
Some controllers support both, but the wiring and configuration must be designed for that combination. Check the controller documentation and local requirements.
Explore E-Bike Parts and Battery Guides
- E-Bike Parts & Accessories
- E-Bike Conversion Kits
- How to Choose an Electric Bicycle Lithium Battery
- How to Choose an E-Bike Controller
- Electric Bicycle & E-Bike Solutions in Bangladesh
For help selecting compatible e-bike components, contact Master Solar BD at +8801750033357. Share the motor voltage and wattage, battery voltage, controller model and sensor connector details before ordering.